PendoTECH Temperature Sensor Transmitter

The PendoTECH Temperature Sensor Transmitter connects to the PendoTECH Temperature Sensor and produces a 4-20milliamp signal that is linear with temperature. It has mounting screws and a DIN rail mounting kit options available. Digital technology and the narrow 4 to 20mA output range from 0 to 70°C ensures accurate and drift free linearization of the sensor output.

For input wiring, the re-usable temperature sensor monitor cable plugs into a connector installed on two of pins on the top face. To maintain CE compliance, input wires must be less than 10ft. in length which is the maximum length of the PendoTECH reusable monitor cables. Extensions are not recommended as additional wire length can impact resistance and accuracy.

For output wiring, it must be shielded cable grounded at one end only. A hole is provided through the center of the transmitter to thread wires if desired. The screw terminals have been designed to allow all connection wires to enter from either an inner or outer direction. The transmitter is protected against reverse connection, therefore incorrect connection of the output wires will result in near zero current flow in the loop. Incorrect connection of the sensor wires will result in the transmitter output going to burnout condition.