Fuji FSZ Ultrasonic Flow Meter

Clamp-on ultrasonic flowmeter that measures volumetric flow rate.

Starting at $1,230.50
Manufactured
Includes
Availability
  • Usually ships in 8-10 weeks
Product Manual Product Specs

Features

  • 0.5 second response time
  • Output signal
    • 4 to 20 mA DC: 1 point
    • Contact: 2 points
  • Transit-time measuring method
  • 1.2 mm to 4.9 mm piping thickness
  • 0 to ±5 m/s (Min. 0 to ±0.2 m/s) measurement range
  • -15 to 85°C (Can vary depending on ambient temperature)

The Fuji FSZ Ultrasonic Flow Meter is designed with a 4 screw clamp to measure flow rates without pipe modification. Configurable with only three buttons- turn on, configure four settings, and start measuring immediately. Special rubber is used to keep the pipe in close contact instead of grease. 

In addition to piping for pure water manufacturing processes, cleaning processes, and equipment cooling, it can also be mounted inside equipment where there is densely spaced small-diameter piping. The device comes with a built-in temperature measurement function which enables simultaneous measurement of flow rate and temperature.

The FSZ can be installed to both cold and hot water piping throughout the entire building. Measuring flow rates within these pipes optimizes the efficiency of fan coil units (FCUs), and air handling units (AHUs) in large spaces. Optimizing these processes can contribute to energy savings.